Ai SolventVap 50L Rotovap With Huber CS100 Chiller & ULVAC Pump

SKU SE130-CS100-UDP6 Category

Specifications

 

 Electrical requirements
 220V 50/60Hz 1~Phase, 29A, 6400 watts (rotation speed: 400 watts)
 Glass material  High borosilicate glass 3.3
 Evaporating flask  Capacity: 13.2 gallon (50 liters or 1.8 cu ft)
Maximum load: Not to exceed 60% of the flasks capacity
Sealing flange: 4.9″ diameter
Rotation speed: 10 to 110 rpm
Evaporating speed: 2 gallon/hour (water), 4 gallon/hour (alcohol)
 Receiving flask
 5.28 gallon (20 liters or 0.7 cu ft)
 Condenser  Glassware: Main + auxiliary triple-circulating cold traps, vertical
Chilling fluid connection: 3/8″ hose barb x 4 (2 on main + 2 on auxiliary)
Condensing surface
Main condenser: 11,500 cm2 or 12.4 sq ft
Auxiliary condenser: 4,000 cm2 or 4.3 sq ft
 Working environment  5 to 95°F
 Water bath  Temperature range: ambient to 99°C (210°F)
Temperature controller: digital
Dimensions: 22.1″ diameter x 12.2″ depth
Material: stainless steel
Media: distilled water only
Max. water level: not to exceed 1″ from the top rim of the bath
Number of heaters: three
Drain port: one
Lifting: Motorized + manual
Maximum lifting distance: 9 inches
 Vacuum level  < 3 torrs
 Vacuum sealing  PTFE + Viton gaskets
 Vacuum connection  3/8″ hose barb x 1
 Safety  Dry-run, over-temp shut-off, built-in circuit breakers
 Unit/shipping dimensions
(WxDxH)
 52 x 30 x 92″ (fully assembled) / 46 x 28 x 58″ (Evaporator), 41 x 34 x 32″ (glassware)
 Shipping weight  525 Lbs
 Compliance  ETL tested to UL and CSA standards
 Download  Ai rotary evaporator brochure